| Coda Fully Electric Car. AWESOME |
Graduated from automotive program at Skyline College. I am currently working at Luscious Garage, a Hybrid Automotive Shop located in downtown San Francisco. My goal is to gain more knowledge of how hybrid vehicles function and diagnose them properly so they can be fixed. Hopefully one day I will go back to Skyline College and teach the students what I have learned.
Monday, March 12, 2012
Sunday, March 11, 2012
Honda Insight Hybrid HV Battery Replacement
First thing we did was print out HV Battery removal procedures from Alldata
| HV Battery is found in the back trunk. There is a center plate that opens for the HV Battery disable switch. |
| After removing the outer shell you will see this above. The HV Battery is the unit on the right side. |
| Remove HV Battery with battery mount out of the car. Insert new battery and put everything back. |
| Done!!! |
Saturday, February 25, 2012
Harvest The Stator
Brand new MG2 came in and I was responsible for removing the stator from MG2.
| Remove all bolt on top except for the three bolts in the middle of MG2. |
| The three bolt in the middle holds the center magnet down. |
| If there is no transmission fluid in MG2..... Add transmission fluid for easy extraction. |
| Shell without the Stator. |
| Stator Harvested from MG2 |
Wednesday, February 15, 2012
Broken Water Pump
Gen 2 Prius taxi came in with a loud whining noise. We concluded that it was the water pump. We followed where the sound was coming from and we also noticed pink coolant all over the area. We first drained the coolant then we remove and replaced the water pump.
| All the pink coolant confirms a leak coming from the water pump. |
| Fixed... New water pump. |
Tuesday, February 14, 2012
Noise in the Axle
Nissan Altima taxi came in with noise coming from the passenger side axial. So we end up changing the axle.
| Remember top remove the tiny wheel sensor and or have a pan ready to catch the transmission fluid before you pull the Axle. |
| Axle removed |
| Make sure you have everything on the new Axle before you install it. |
| Done and all ready to go. Don't forget the wheel sensor and top off the transmission fluid before you finish the job. |
Saturday, February 11, 2012
Friday Night .....
This was the first Friday night I ever worked. Hmm I think it went pretty well. Learned another simple reminder today. Sometimes a little slower is the fastest way. Finding the best route or creating your system will allow you to be the most efficient at what you do. For example on a oil change today. I removed the drain plug then the filter. My next move was get the oil from the back. Brought oil to the car then realized I forgot the filter. I go back to get the filter and I realized how I wasn't efficient. Something so simple took me two moves. Come on Ray.... So I fixed it. From now on I get the oil and the filter at the same time. Efficiency is very important in this industry and hopefully I can become a very efficient person.
On the side note.. Today is my daughter's 1st birthday. Wow that was fast. Happy Birthday Jordin !!


On the side note.. Today is my daughter's 1st birthday. Wow that was fast. Happy Birthday Jordin !!
Tuesday, February 7, 2012
Towed in no start.
Nissan Altima Hybrid towed in with a no start. Code P0A7A ... Bad inverter. Removed and replaced the bad Inverter (pictures below). Add coolant with vacuum feed. After installing the new inverter we remove the ground on the 12v battery to reset all the codes. Took it for a test drive to reset any other codes left behind.
Another Gen 2 Prius taxi came in a while back with a malfunction on his instrument cluster panel (black out). We gave him a loner unit that we installed while his original was sent out for repairs. He came today because his origanal unit was ready for installation. Stripped the dash from drivers side to the passenger side. Thank you Rick for teaching me the way.
| Drained inverter coolant before starting. Also remove the Service Plug for safety. |
| Make sure you remove all connectors and hoses before you remove. |
| Remove all brackets and place in new inverter before you install. |
Another Gen 2 Prius taxi came in a while back with a malfunction on his instrument cluster panel (black out). We gave him a loner unit that we installed while his original was sent out for repairs. He came today because his origanal unit was ready for installation. Stripped the dash from drivers side to the passenger side. Thank you Rick for teaching me the way.
| Remove all pieces from left to right to get to the center console. |
| Center console removed from the car and unscrew unit and replace with rebuilt one. |
| Complete after new instrument cluster was finish. Thanks again Rick. |
Subscribe to:
Posts (Atom)